Sale

Full Hot Tub Service

Name: Full Hot Tub Service
Brand: Hot Tub Liverpool
Price: 249.0 GBP
Availability: InStock

Qty

GUARANTEED SAFE CHECKOUT

£249.00£349.00

Description
Delivery
Reviews

We advise this to be done at least once a year to keep your warranty valid. Very similar to a car, you should get your hot tub serviced annually.

The full hot tub service includes a chemical flush which is run through the system for 10-15mins, stripping out bacteria and build-up of scale or scum in the pipework and heater. The hot tub is then fully drained and cleaned inside and out, including a UV treatment applied to the cover. The spa is then refilled, water rebalanced with customers' chemicals. Within the price we will include a new set of filters (for Hot Tub Liverpool hot tubs). We then perform a 19-point check on the hot tub, covering all major parts.

Pipework flush (requires spa up to temperature)
Drain down, wet vacuum, and rinse of hot tub shell
Full internal clean
Full external clean
UV cover treatment applied
Full inspection of key electrical components
Freshwater refill
Chemical rebalance
Pump check
Blower check
Clean jets
Pipe and union check
Hot Tub re-start
19 point check sheet

Please follow the contact details for your hot tub servicing:

EMAIL

sales@hottubliverpool.com

PHONE

0151 662 0284

SHOWROOM ADDRESS
Hot Tub Liverpool,
Century Buildings, 15 Summers Rd,
Liverpool, L3 4BL

(At the back of Brunswick Business Park)

Opening Times:

Mon-Fri 9am-4pm

Sat 10am-2pm.

VAT Number: GB382635479

Company Number: 13164303

Registered in England & Wales

Frequently Asked Questions

The ideal pH level for a hot tub is between 7.2 and 7.8. A pH level that is too low (acidic) can irritate your skin and eyes, while a pH level that is too high (alkaline) can make the water cloudy and uncomfortable to swim in.

The ideal total alkalinity level for a hot tub is between 80 and 120 ppm. Total alkalinity helps to buffer the pH level of the water, so it doesn't fluctuate too much.

The ideal calcium hardness level for a hot tub depends on the type of finish on your hot tub. For acrylic hot tubs, the ideal calcium hardness level is between 100 and 250 ppm. For plaster hot tubs, the ideal calcium hardness level is between 250 and 450 ppm.

The most common chemicals used to maintain hot tub water chemistry are chlorine, bromine, and sanitizers. Chlorine is the most effective sanitizer, but it can be harsh on your skin and eyes. Bromine is a less harsh alternative to chlorine, but it can be more expensive. Sanitizers are a combination of chemicals that work together to keep your hot tub water clean and safe.

You should test the water chemistry in your hot tub at least three times a week. If you use your hot tub frequently, you may need to test the water more often.

You can adjust the pH level of your hot tub water with pH increaser or pH decreaser chemicals. Follow the instructions on the product label to add the correct amount of chemical to your water.

You can adjust the total alkalinity level of your hot tub water with total alkalinity increaser or total alkalinity decreaser chemicals. Follow the instructions on the product label to add the correct amount of chemical to your water.

Shocking your hot tub is a way to kill bacteria and other contaminants in the water. You can shock your hot tub with chlorine or bromine shock. Follow the instructions on the product label to add the correct amount of shock to your water.

Winterizing your hot tub is important to prevent damage to the equipment and the tub itself. To winterize your hot tub, you will need to drain the water, add a winterizing solution, and cover the tub.

Some common problems with hot tub water chemistry include:

Cloudy water
Foamy water
Scale build-up
Low pH
High pH
Low total alkalinity
High total alkalinity

If you experience any of these problems, you should test the water chemistry and adjust it as needed.

Full Hot Tub Service

Frequently Asked Questions

Recently viewed products

Feel the Beat - Subscribe Today!