Swimfresh Chlorine Reducer

£11.99

Description
Delivery
Reviews

Swimfresh Chlorine Reducer is used for lowering chlorine or bromine levels in hot tub water after shock treatment or as a problem solver if the hot tub has been overdosed with chlorine or bromine.

Application Instructions

Dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10ltrs) of clean warm water. Stir well to ensure the product is fully dissolved. carefully add the solution to the tub whilst the pump is turned on, preferably near the water inlets to aid distribution.
If applying after shock treatment, allow a minimum of 8 hours for the shock chlorination to oxidise wastes from the water before application.
Measure the free chlorine level in the water then using the table below calculate the total amount required.
Split this into 4 smaller doses, apply each quater dose allowing time to thoroughly circulate before retesting and if necessary adding further doses.

Dose Rates

Water Volume To Lower Chlorine Level by

Litres	Gallons	1mg/l(ppm)	2mg/l(ppm)	5mg/(ppm)
4,545	1,000	23g	46g	114g
9,090	2,000	45g	91g	227g
22,700	5,000	114g	228g	568g
45,450	10,000	227g	454g	1.14kg
68,175	15,000	341g	682g	1.70kg

We supply a number of chemicals, filters and other accessories such as steps and cover lifters. These can either be purchased by calling in to the showroom, visiting the website or over the phone.

If we don’t have a particular item in stock that you have ordered, we will do our best to find out when the earliest possible date would be for us to receive it and get back to you as quickly as possible.

If you order your accessories via the website or over the phone, we will aim to send them out the same day via Parcel Force on an Express 24 delivery, so you receive them as soon as possible. when we have obtained the tracking number, we will contact you to let you know what the number is so you can also keep track of your delivery.

Frequently Asked Questions

The ideal pH level for a hot tub is between 7.2 and 7.8. A pH level that is too low (acidic) can irritate your skin and eyes, while a pH level that is too high (alkaline) can make the water cloudy and uncomfortable to swim in.

The ideal total alkalinity level for a hot tub is between 80 and 120 ppm. Total alkalinity helps to buffer the pH level of the water, so it doesn't fluctuate too much.

The ideal calcium hardness level for a hot tub depends on the type of finish on your hot tub. For acrylic hot tubs, the ideal calcium hardness level is between 100 and 250 ppm. For plaster hot tubs, the ideal calcium hardness level is between 250 and 450 ppm.

The most common chemicals used to maintain hot tub water chemistry are chlorine, bromine, and sanitizers. Chlorine is the most effective sanitizer, but it can be harsh on your skin and eyes. Bromine is a less harsh alternative to chlorine, but it can be more expensive. Sanitizers are a combination of chemicals that work together to keep your hot tub water clean and safe.

You should test the water chemistry in your hot tub at least three times a week. If you use your hot tub frequently, you may need to test the water more often.

You can adjust the pH level of your hot tub water with pH increaser or pH decreaser chemicals. Follow the instructions on the product label to add the correct amount of chemical to your water.

You can adjust the total alkalinity level of your hot tub water with total alkalinity increaser or total alkalinity decreaser chemicals. Follow the instructions on the product label to add the correct amount of chemical to your water.

Shocking your hot tub is a way to kill bacteria and other contaminants in the water. You can shock your hot tub with chlorine or bromine shock. Follow the instructions on the product label to add the correct amount of shock to your water.

Winterizing your hot tub is important to prevent damage to the equipment and the tub itself. To winterize your hot tub, you will need to drain the water, add a winterizing solution, and cover the tub.

Some common problems with hot tub water chemistry include:

Cloudy water
Foamy water
Scale build-up
Low pH
High pH
Low total alkalinity
High total alkalinity

If you experience any of these problems, you should test the water chemistry and adjust it as needed.

Swimfresh Chlorine Reducer

Frequently Asked Questions

Recently viewed products

Feel the Beat - Subscribe Today!

MEGA SALE